 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NL17SZ126 Non-Inverting 3-State Buffer The NL17SZ126 is a high performance single noninverting buffer operating from a 1.65 V to 5.5 V supply. Features http://onsemi.com MARKING DIAGRAM * * * * * * * * * * * Extremely High Speed: tPD 2.6 ns (typical) at VCC = 5.0 V Designed for 1.65 V to 5.5 V VCC Operation Over Voltage Tolerant Inputs and Outputs LVTTL Compatible - Interface Capability With 5.0 V TTL Logic with VCC = 3.0 V LVCMOS Compatible 24 mA Balanced Output Sink and Source Capability Near Zero Static Supply Current Substantially Reduces System Power Requirements 3-State OE Input is Active HIGH Replacement for NC7SZ126 Chip Complexity = 36 Feet Pb-Free Packages are Available SC-88A (SOT-353) DF SUFFIX CASE 419A M2 M G G M M2 MG G SOT-553 XV5 SUFFIX CASE 463B M2 = Specific Device Code D = Date Code G = Pb-Free Package (Note: Microdot may be in either location) *Date Code orientation and/or position may vary depending upon manufacturing location. OE 1 5 VCC IN A 2 PIN ASSIGNMENT GND 3 4 OUT Y 1 2 3 OE IN A GND OUT Y VCC Figure 1. Pinout (Top View) 4 5 FUNCTION TABLE OE IN A OUT Y OE Input H H L X = Don't Care A Input L H X Y Output L H Z Figure 2. Logic Symbol ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 5 of this data sheet. (c) Semiconductor Components Industries, LLC, 2006 1 February, 2006 - Rev. 5 Publication Order Number: NL17SZ126/D NL17SZ126 MAXIMUM RATINGS Symbol VCC VIN VOUT IIK IOK IOUT ICC TSTG TL TJ qJA PD MSL FR VESD DC Supply Voltage DC Input Voltage DC Output Voltage DC Input Diode Current DC Output Diode Current DC Output Sink Current DC Supply Current per Supply Pin Storage Temperature Range Lead Temperature, 1 mm from Case for 10 Seconds Junction Temperature Under Bias Thermal Resistance Power Dissipation in Still Air at 85C Moisture Sensitivity Flammability Rating ESD Withstand Voltage Oxygen Index: 28 to 34 Human Body Model (Note 2) Machine Model (Note 3) Charged Device Model (Note 4) SC-70/SC-88A SC-70/SC-88A Parameter Value *0.5 to )7.0 *0.5 to )7.0 *0.5 to )7.0 *50 *50 $50 $100 *65 to )150 260 )150 350 150 Level 1 UL 94 V-0 @ 0.125 in u2000 u200 N/A V Unit V V V mA mA mA mA C C C C/W mW Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. Measured with minimum pad spacing on an FR4 board, using 10 mm-by-1 inch, 2 ounce copper trace with no air flow. 2. Tested to EIA/JESD22-A114-A. 3. Tested to EIA/JESD22-A115-A. 4. Tested to JESD22-C101-A. RECOMMENDED OPERATING CONDITIONS Symbol VCC VIN VOUT TA tr, tf DC Supply Voltage DC Input Voltage DC Output Voltage Operating Temperature Range Input Rise and Fall Time VCC = 1.8 V $0.15 V VCC = 2.5 V $0.2 V VCC = 3.0 V $0.3 V VCC = 5.0 V $0.5 V NORMALIZED FAILURE RATE Parameter Min 1.65 0 0 *40 0 0 0 0 Max 5.5 5.5 5.5 )85 20 20 10 5.0 Unit V V V C ns/V DEVICE JUNCTION TEMPERATURE VERSUS TIME TO 0.1% BOND FAILURES Junction Temperature C 80 90 100 110 120 130 140 Time, Hours 1,032,200 419,300 178,700 79,600 37,000 17,800 8,900 Time, Years 117.8 47.9 20.4 9.4 4.2 2.0 1.0 FAILURE RATE OF PLASTIC = CERAMIC UNTIL INTERMETALLICS OCCUR TJ = 130C TJ = 120C TJ = 100C TJ = 110C TJ = 90C TJ = 80C 100 TIME, YEARS 1 1 10 1000 Figure 3. Failure Rate versus Time Junction Temperature http://onsemi.com 2 NL17SZ126 DC ELECTRICAL CHARACTERISTICS VCC (V) 1.65 to 1.95 2.3 to 5.5 1.65 to 1.95 2.3 to 5.5 1.65 1.8 2.3 3.0 4.5 1.65 2.3 3.0 3.0 4.5 VOL Low-Level Output Voltage VIN = VIL 1.65 1.8 2.3 3.0 4.5 1.65 2.3 3.0 3.0 4.5 IIN IOZ IOFF ICC Input Leakage Current 3-State Output Leakage Power Off Leakage Current Quiescent Supply Current 0 to 5.5 1.65 to 5.5 0.0 1.65 to 5.5 1.55 1.7 2.2 2.9 4.4 1.29 1.9 2.4 2.3 3.8 1.65 1.8 2.3 3.0 4.5 1.52 2.15 2.80 2.68 4.20 0.0 0.0 0.0 0.0 0.0 0.08 0.10 0.15 0.22 0.22 0.1 0.1 0.1 0.1 0.1 0.24 0.30 0.40 0.55 0.55 $1.0 $0.5 1.0 1.0 TA = 255C Min 0.75 VCC 0.7 VCC 0.25 VCC 0.3 VCC 1.55 1.7 2.2 2.9 4.4 1.29 1.9 2.4 2.3 3.8 0.1 0.1 0.1 0.1 0.1 0.24 0.30 0.40 0.55 0.55 $1.0 $5.0 10 10 Typ Max *405C v TA v 855C Min 0.75 VCC 0.7 VCC 0.25 VCC 0.3 VCC Max Unit V V V IOH = -100 mA Condition Symbol VIH VIL VOH Parameter High-Level Input Voltage Low-Level Input Voltage High-Level Output Voltage VIN = VIH V IOH = -4 mA IOH = -8 mA IOH = -16 mA IOH = -24 mA IOH = -32 mA IOL = 100 mA V V IOL = 4 mA IOL = 8 mA IOL = 16 mA IOL = 24 mA IOL = 32 mA 0 V v VIN v 5.5 V VIN = VIH or VIL 0 V v VOUT v 5.5 V VIN or VOUT = 5.5 V VIN = 5.5 V, GND mA mA mA mA AC ELECTRICAL CHARACTERISTICS (tR = tF = 3.0 ns) Symbol tPLH tPHL Parameter Propagation Delay AN to YN (Figures 4, and 5, Table 1) Condition RL = 1 MW RL = 1 MW RL = 1 MW RL = 500 W RL = 1 MW RL = 500 W tPZH tPZL Output Enable Time (Figures 6, 7 and 8, Table 1) RL = 250 W CL = 15 pF CL = 15 pF CL = 15 pF CL = 50 pF CL = 15 pF CL = 50 pF CL = 50 pF VCC (V) 1.8 $ 0.15 2.5 $ 0.2 3.3 $ 0.3 5.0 $ 0.5 1.8 $ 0.15 2.5 $ 0.2 3.3 $ 0.3 5.0 $ 0.5 tPHZ tPLZ Output Disable Time (Figures 6, 7 and 8, Table 1) RL and R1= 500 W CL = 50 pF 2.5 $ 0.2 2.5 $ 0.2 3.3 $ 0.3 5.0 $ 0.5 TA = 255C Min 2.0 1.0 0.8 1.2 0.5 0.8 2.0 1.8 1.2 0.8 1.5 1.5 0.8 0.3 9.0 Typ 9.5 3.4 Max 12 7.5 5.2 5.7 4.5 5.0 10.5 8.5 6.2 5.5 8.0 8.0 5.7 4.7 *405C v TA v 855C Min 2.0 1.0 0.8 1.2 0.5 0.8 2.0 1.8 1.2 0.8 1.5 1.5 0.8 0.3 Max 12.5 8.0 5.5 6.0 4.8 5.3 12.5 9.0 6.5 5.8 8.5 8.5 6.0 5.0 ns ns Unit ns http://onsemi.com 3 NL17SZ126 CAPACITIVE CHARACTERISTICS Symbol CIN COUT CPD Input Capacitance Output Capacitance Power Dissipation Capacitance (Note 5) Parameter Condition VCC = 5.5 V, VI = 0 V or VCC VCC = 5.5 V, VI = 0 V or VCC 10 MHz, VCC = 3.3 V, VI = 0 V or VCC 10 MHz, VCC = 5.5 V, VI = 0 V or VCC Typical 2.5 2.5 9 11 Unit pF pF pF 5. CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC(OPR) = CPD VCC fin + ICC. CPD is used to determine the no-load dynamic power consumption; PD = CPD VCC2 fin + ICC VCC. tf = 3 ns 90% 90% tf = 3 ns VCC INPUT Vmi 10% OE = VCC INPUT A and B OUTPUT CL * RL Vmi 10% GND tPHL tPLH VOH *Includes all probe and jig capacitance. A 1-MHz square input wave is recommended for propagation delay tests. OUTPUT Y Vmo Vmo VOL Figure 4. Switching Waveform 2 VCC Figure 5. TPLH or TPHL INPUT R1 = 500 W OUTPUT CL = 50 pF RL = 500 W INPUT VCC OUTPUT CL = 50 pF RL = 250 W A 1-MHz square input wave is recommended for propagation delay tests. A 1-MHz square input wave is recommended for propagation delay tests. Figure 6. TPZL or TPLZ Figure 7. TPZH or TPHZ 2.7 V OE Vmi Vmi 0V tPZH Vmo tPHZ VCC VOH - 0.3 V 0V On tPZL tPLZ 3.0 V VOL + 0.3 V GND On Vmo Figure 8. AC Output Enable and Disable Waveform http://onsemi.com 4 NL17SZ126 Table 1. Output Enable and Disable Times tR = tF = 2.5 ns, 10% to 90%; f = 1 MHz; tW = 500 ns VCC Symbol Vmi Vmo 3.3 V $ 0.3 V 1.5 V 1.5 V 2.7 V 1.5 V 1.5 V 2.5 V $ 0.2 V VCC/2 VCC/2 DEVICE ORDERING INFORMATION Device NL17SZ126DFT2 NL17SZ126DFT2G NL17SZ126XV5T2G Package Type SC70-5/SC-88A/SOT-353 SC70-5/SC-88A/SOT-353 (Pb-Free) SOT-553 (Pb-Free) Shipping 3000 / Tape & Reel 3000 / Tape & Reel 4000 / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 5 NL17SZ126 PACKAGE DIMENSIONS SC-88A, SOT-353, SC-70 CASE 419A-02 ISSUE J A G NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 419A-01 OBSOLETE. NEW STANDARD 419A-02. 4. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. 5 4 S 1 2 3 -B- DIM A B C D G H J K N S D 5 PL 0.2 (0.008) M B M N J C INCHES MIN MAX 0.071 0.087 0.045 0.053 0.031 0.043 0.004 0.012 0.026 BSC --- 0.004 0.004 0.010 0.004 0.012 0.008 REF 0.079 0.087 MILLIMETERS MIN MAX 1.80 2.20 1.15 1.35 0.80 1.10 0.10 0.30 0.65 BSC --- 0.10 0.10 0.25 0.10 0.30 0.20 REF 2.00 2.20 H K SOLDERING FOOTPRINT* 0.50 0.0197 0.65 0.025 0.65 0.025 0.40 0.0157 1.9 0.0748 *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 6 NL17SZ126 PACKAGE DIMENSIONS SOT-553, 5 LEAD CASE 463B-01 ISSUE B NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. DIM A b c D E e L HE MILLIMETERS NOM MAX 0.55 0.60 0.22 0.27 0.13 0.18 1.60 1.70 1.20 1.30 0.50 BSC 0.10 0.20 0.30 1.50 1.60 1.70 MIN 0.50 0.17 0.08 1.50 1.10 MIN 0.020 0.007 0.003 0.059 0.043 INCHES NOM 0.022 0.009 0.005 0.063 0.047 0.020 BSC 0.004 0.008 0.059 0.063 MAX 0.024 0.011 0.007 0.067 0.051 0.012 0.067 D -X- A L 4 5 1 2 3 E -Y- HE b e 5 PL M c XY 0.08 (0.003) SOLDERING FOOTPRINT* 0.3 0.0118 0.45 0.0177 1.0 0.0394 1.35 0.0531 0.5 0.5 0.0197 0.0197 SCALE 20:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082-1312 USA Phone: 480-829-7710 or 800-344-3860 Toll Free USA/Canada Fax: 480-829-7709 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. http://onsemi.com 7 NL17SZ126/D |
Price & Availability of NL17SZ126DFT2
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |